Watch

Watch will track all traffic to the internet and track all active conversations and categorize them. It will track the Processes that are talking on the network when paired with Connectwise Automate(LabTech). It will also track and probe all local assets to identify all devices that are connected to your network and provide a network topology map. All internet traffic will be probed for blacklisted servers, reverse DNS and geolocated.

More Information  -  Support Forum

MapMe

MapMe will scan your network and produce a network topology Map complete with detailed data on each device and interface.


More Information  -  Support Forum

IOT Scanner

Scan for devices that answer to the Mirai botnet. This will scan for all devices that answer to Telnet connections and then try to use the password list to obtain access to the device. All telnet devices will be shown with ones in red being devices that should be replaced.





.

More Information  -  Support Forum

CW Asset Scanner

Scan For Assets in the network and generate a Topology map. Upload all of this information to your connectwise system.





.

More Information  -  Support Forum

LT Mapper

Generate Topology Map and upload it to a client as a document.





.

More Information  -  Support Forum

Bandwidth Monitor

The Watch Bandwidth monitor will let you monitor and graph you SNMP devices bandwidth. You can have multiple graphs running at the same time. The Program sits in the Tray and will start monitoring as soon as its run after it has been setup.

More Information  -  Download  -  Support Forum

Asset Scanner

The Watch Asset Scanner will scan your subnet for all devices. It uses Many techniques to detect the devices. And you can export the results to Excel. This tool does NOT require LabTech to work.Select the Subnet to scan, enter a valid IP address and it will scan the Class C subnet of this address. Turn Off detection methods to make the scan faster, enter the SNMP community to test SNMP devices(this is NOT required) The results of your scan can be exported to an Excel file.

More Information  -  Download  -  Support Forum

SNMP Browser

The Watch SNMP Browser will scan the network for all SNMP Devices. When it finds one it will walk the device and return all values it finds. The Netowkr is listed in a tree view so you can browse down the list of OIDS. It uses a MIBS folder in the current directory to translate OIDS to values, if the MIBS are missing it will still work, but it will have numbers only. If you run the program without MIBS then the settings will be set to NO MIB Mode and you will have to uncheck it if you add MIBS later on.

More Information  -  Download  -  Support Forum

Traffic Monitor

The Watch Traffic Monitor is a tool that will monitor bandwidth of network links and latency of responses. Bandwidth is monitored using SNMP v1-3 or windows performance counters from across the network. Latency can monitor a Ping result or the time it takes to request a web page using a standard URI.

More Information  -  Download  -  Support Forum

Wifi Scanner

The Watch WiFi Scanner shows you all access points in range with strength and distance to the AP.

More Information  -  Download  -  Support Forum

TFTP Tool

The Watch TFTP Tool helps facilitate TFTP file transfers. The Tool provides a TFTP Server and Client.

More Information  -  Download

NTP Viewer

The Watch NTP Viewer will test a Time server and set your clock to the time returned if you want. Enter the time server and get the time to see that its valid. Uncheck SNTP to use the Old Time protocol. Check the set time to set your machines time to the returned value.

More Information  -  Download  -  Support Forum